Last updated: November 2026 | MEKALEO Engineering Team — LED media facade manufacturer since 2004
A five-year warranty can cover less than a three-year warranty. Not as a trick — as a matter of drafting. Two certificates, both saying “5 years”, can differ by a factor of ten in what they cost you between year three and year five, because the years are the headline and the clauses are the contract.
Quick answer: A facade warranty is worth what its clauses say, not how many years the headline claims. Before signing, check six things — the start date, which components are covered and for how long, whether remediation is replacement or pro-rata, what is excluded (labour, freight, access equipment), the failure-rate threshold that triggers action, and the claim process with a stated response time.
We have been asked to honour warranties written by other suppliers’ sales teams, and we have watched project teams discover in year four that their certificate covered “LED modules only, excluding labour, freight and access equipment”. On a high-rise facade, the access equipment is usually the largest number on the invoice.
So this is not a page about how long our warranty is. It is about the six variables that decide what a facade warranty is actually worth, and how to check a certificate before you sign one.
1. What a Facade Warranty Actually Covers — Three Separate Things
“Warranty” on a media facade almost always bundles three different promises, and suppliers rarely separate them:
| Promise | What it means | Typical duration |
|---|---|---|
| Material and workmanship | A module or driver that fails through manufacturing defect is replaced | 3–5 years |
| Water ingress | The IP66 seal holds under the site’s real rain and wind-driven conditions | 2–5 years, often shorter |
| Luminous maintenance | Output stays above an agreed percentage of initial brightness | 5–7 years, defined as L70 or L80 |
The first is what you probably think you bought. The second is what actually fails on facades. The third is what determines whether the building still looks like the render in year six.
A warranty that names only the first is a warranty against a factory defect, not against a facade failure. Ask for all three, separately, with a stated number for each.
One more distinction before the rest. In Commonwealth and Gulf contracts the same obligation often appears as a defects liability period (DLP) — with retention held against it — rather than a warranty. The coverage is similar, the remedy is not: a DLP obliges the contractor to rectify the work, while a parts warranty may oblige nothing more than shipping a module. On FIDIC-based contracts, check which one you actually hold.
2. The Three Numbers Behind “5-Year Warranty”
Any warranty statement should resolve to three measurable figures. If it does not, it is a marketing sentence.
Number one — the failure criterion. “Warranted for 5 years” against what threshold? The honest formulations are:
- L70 at 50,000 hours — output at or above 70% of initial lumens
- Dead pixels ≤0.1% of total by year 5, having started at ≤0.03%
- Colour shift within 3 SDCM of the approved sample
Some certificates add a fourth: a failure rate, typically ≤0.5% of modules per year. The number matters less than its status — a rate that triggers batch replacement is a commitment, a rate quoted as “expected performance” is a description. Ask which one you are signing.
Number two — the response obligation. A warranty is a promise about time, not only about parts. What matters is the committed interval from a documented fault report to a defined action:
| Tier | Commitment | What it implies |
|---|---|---|
| Strong | Technical response in 48 h, replacement modules dispatched in 10 working days | Supplier holds facade spares |
| Adequate | Response in 5 working days, dispatch within 30 days | Replacement produced to order |
| Weak | “Replacement at supplier’s discretion within a reasonable period” | No obligation in practice |
Number three — who pays what. Parts, labour, freight, customs, and access equipment are four separate costs. A warranty covering parts only, on a 60-metre facade, transfers the three expensive ones to you. Access equipment alone — scaffold, gondola or rope access — can exceed the value of the modules being replaced.
3. When Does the Clock Start?
The most overlooked line in a facade warranty, and the one that quietly costs months. Three definitions are common in the market:
| Start date as written | What it actually means for you |
|---|---|
| Date of acceptance or substantial completion | Best case. The clock starts when the facade is running and calibrated |
| Date of delivery to site | You lose transit, storage and installation time — often 6–12 weeks of a five-year term |
| 30 days after delivery, or 90 days after shipment, whichever comes first | A common compromise: it caps how long the supplier carries an uninstalled product |
| Date of invoice | Worst case. You are burning warranty months before the facade exists |
On a project with a four-month installation programme, the difference between “acceptance” and “invoice” is roughly 7% of a five-year warranty — and it lands exactly in the years when failures start.
Two related clauses belong next to the start date:
- Suspension during site delay. If the building is delayed for reasons outside your control, the warranty should pause rather than run out in a warehouse.
- Extension after a repair campaign. If a batch of modules is replaced in year four, the repaired area should not inherit the original expiry three months later.
Write the start date in words, not as a reference to “the warranty period”. Ambiguity here is resolved in favour of whoever drafted the document, and that is rarely the buyer.
4. Components Age at Different Rates
A single “5-year warranty” hides the fact that six different components fail on six different clocks. A certificate that does not separate them is usually setting you up for a year-three conversation about which category a fault belongs to.
| Component | Typical term | Why it differs |
|---|---|---|
| LED modules | 5 years, L70 at 50,000 h | The most expensive line, and the most heavily tested |
| Power supplies | 2–3 years | Electrolytic capacitors are the limiting factor, not the LEDs |
| Receiving cards and controllers | 3 years | Surge and heat exposure; often the first electronic failure |
| Connectors and cable | 3 years, frequently excluded once terminated on site | Mechanical and chemical wear, and the hardest to prove |
| Structural brackets and fixings | 5–10 years, corrosion-dependent | Governed by the environment, not by the electronics |
| Software, media player, network | 1 year, or excluded | Third-party dependency the supplier does not control |
Two practical consequences. First, if your power supplies carry a three-year term inside a five-year facade warranty, budget for a PSU replacement wave in year four — on a 600 m² facade that is a real number, and it is predictable. Second, ask which category a fault falls into before you need to claim: a dim module is luminous maintenance, a dead module is a defect, and a corroded connector is usually an exclusion.
Whether you can replace one of those six on its own also depends on how the module is built — potted module, pluggable receiving card, connector type. Those construction details are published per model in the LED mesh screen specifications; a five-year module term is worth little if the module cannot be swapped without taking the cabinet off the wall.
5. What Is Normally Excluded, and Why
Exclusions are not automatically unfair. Several exist because the failure genuinely is not the supplier’s. The problem is when an exclusion is written so broadly that nothing is left covered.
| Exclusion | Reasonable? | What to watch for |
|---|---|---|
| Acts of God, war, vandalism, power surges | Yes | “Power supply failure” should not be excluded wholesale — drivers are part of the system |
| Improper installation by others | Yes, if installation was not in scope | Requires the supplier to have published installation requirements. If none exist, this exclusion can void everything |
| Modification or repair by third parties | Yes | Should not extend to routine cleaning and lamp replacement |
| Cosmetic change (yellowing, dust, minor colour shift) | Partly | Should be defined by a measurable threshold, not left to opinion |
| Consumables (gaskets, desiccant, fans) | Yes, if named | Gaskets are the leading cause of ingress failure; their replacement interval should be published |
| Consequential loss, loss of revenue, loss of advertising income | Standard | Reasonable for a component supplier; consider separate project insurance |
| Damage from cleaning chemicals or pressure washing | Yes | Publish the allowed cleaning method — otherwise any cleaning can be called misuse |
One exclusion deserves special attention: “water ingress where the connector was terminated on site.” Many facade systems ship with pre-assembled IP67 connectors precisely to remove this variable. If your project requires site termination, the warranty on ingress may not survive it. Settle that in the contract, not after the first leak.
6. Pro-Rata vs Replacement: The Clause That Decides Year Four
This is the single most expensive difference between two warranties of the same length.
Replacement warranty: if a module fails within the term, it is replaced at no charge for the part. Simple, and what most buyers assume they have.
Pro-rata warranty: the supplier’s obligation decreases over time. A common formula gives you 100% cover in year one, declining by 20% per year, so a failure in year four is covered at 20–40% of the part price — and the labour, freight and access costs were never covered at all. Note also the form of the remedy: pro-rata cover is usually issued as a credit against your next order, not a cash refund, which is worth little if this facade is your last one.
Worked comparison on a realistic failure — 1.2% of 18,000 modules, i.e. 216 modules, failing in year four of a five-year term:
| Replacement warranty | Pro-rata at 20%/yr | |
|---|---|---|
| Module cost covered | 216 × $34 = $7,344 | 216 × $34 × 40% = $2,938 |
| Freight (air, palletised) | covered | usually excluded |
| Labour, 2 technicians, 6 days | you | you |
| Rope access or gondola, 6 days | you | you |
| Your out-of-pocket | ≈ $3,900 | ≈ $8,300 + shipping |
Same five-year headline. More than double the cost, in the year you have already stopped budgeting for the facade.
Write “replacement, not pro-rata” into the contract, and state that the replaced part carries a fresh term of at least 24 months. A replacement installed in year 4 with no residual warranty is a repair, not a remedy.
The market standard for that residual term is either the remainder of the original period or 90 days from shipment of the replacement, whichever is longer. Read it carefully: on a five-year warranty with a failure in year 4.5, “whichever is longer” gives you 90 days, not a fresh five years. If the module is a batch problem, that 90 days will expire before the replacement batch has proven itself. Negotiate a fresh 24 months on replaced parts, and a batch clause: if more than 2% of a production batch fails within the term, the whole batch is replaced rather than patched module by module.
7. Why Coastal and High-Humidity Projects Need Different Terms
The standard facade warranty is written for a temperate inland site. Three environments break that assumption:
Within 5 km of the coast. Salt spray attacks the aluminium and the connector plating, not the LED. Standard anodising shows visible corrosion within 18–24 months in Gulf conditions. A coastal warranty should require marine-grade anodising, a 500-hour neutral salt spray report to ISO 9227, and a stated inspection interval.
Tropical high humidity with high daytime temperature. Condensation cycles inside the housing are more aggressive than direct rain, because they repeat daily. Potting (full encapsulation in PU or silicone) survives this far better than gasket-only sealing, and a warranty that covers both identically is mispriced.
High-pollution urban sites. Sulphur and particulate deposits on the diffuser reduce output and can be misread as LED degradation at year three. Warranty terms should distinguish measured lumen depreciation from a dirty surface — otherwise the claim becomes an argument about cleaning.
If your site is coastal, get the salt-spray report before the warranty conversation. A supplier who cannot produce one is offering a warranty on a product it has not tested for your environment.
8. How a Claim Actually Works
Most warranty disputes are not about whether a module failed. They are about whether the claim was filed correctly. The procedure is short, and skipping a step is the fastest way to have a valid claim refused.
- Document the fault at the module. Photograph it, note the module position from the commissioning numbering, record the date and the controller log. “The facade looks patchy” is not a claim; “modules 214–217, row 6, column 12, since 12 March” is.
- Report inside the window. Ten working days from discovery is the common requirement. Late reporting is the single most used ground for refusal.
- Accept remote triage. Expect a video call, a controller log export and a power measurement before anyone agrees to ship anything.
- Get an RMA number before returning anything. Unsolicited returns are usually refused at customs or lost in the warehouse.
- Agree the cause in writing. Defect, installation error or environment. This determines who pays, and it should be settled before parts move.
- Receive and fit the replacement, then update the module register so the next claim is not argued from scratch.
- Confirm the residual warranty on the replaced units in writing, by email is enough.
Have these ready before you need them: the as-built module layout with numbering, the commissioning baseline (brightness and colour measurements), the installation method statement, and the maintenance log. A supplier who receives those four documents has very little room to dispute a claim. A supplier who receives a photograph and a complaint has a great deal.
9. Warranty Is Not Maintenance — Budget for Both
A warranty replaces failed parts. It does not clean, inspect, recalibrate or prevent failure. Projects that treat the two as the same thing discover the gap in year three, when the facade is dimmer and patchier than the certificate implies, and nothing has technically failed.
What a facade actually needs, independent of warranty:
- Annual visual inspection of connectors, cable entries and drainage paths
- Brightness and colour measurement every 12–24 months, logged against the commissioning baseline
- Gasket and desiccant replacement on the interval the supplier publishes — if no interval is published, assume 4–5 years
- Controller and PSU health check, including fan filters and cabinet sealing
- Cleaning to the approved method only; pressure washing voids most ingress warranties
A maintenance contract is not a warranty upgrade and a warranty is not a maintenance plan. On a 600 m² facade, a modest annual inspection costs far less than one rope-access intervention that could have been avoided.
How easily those five items can be done is decided by the mounting system, not by the maintenance crew. Front-service cabinets open from the room side; rear-service ones need clear space behind the screen. The LED mesh screen range states the service access for each model — check it before accepting a warranty that requires an annual inspection.
10. How to Check a Warranty Certificate: Nine Items
Before signing, the certificate should answer all nine. If any is missing, ask for it in writing — a verbal answer is worth nothing at the claim stage.
- The start date, defined in words: acceptance, delivery, invoice, or the 30/90-day rule
- The criteria, in numbers: L70 or L80 with the LM-80 data behind it, dead-pixel percentage, SDCM tolerance
- The term for each coverage type separately — workmanship, ingress, luminous maintenance
- The term for each component class — modules, PSU, controller, connectors, structure
- Replacement or pro-rata, with the formula if pro-rata
- Response time in working days, dispatch time for replacement parts, and the claim deadline
- Who pays parts, labour, freight, customs and access equipment
- The excluded list, in full, with the cleaning method and installation requirements it references
- Spares and model support commitment — how many years after delivery the model remains available
The last item is the one buyers most often forget, and the one they regret. A warranty that promises replacement for eight years is worth little if the model is discontinued in year three and the replacement is a mechanically incompatible generation. Ask for a written support period, and ask what happens to the mounting interface if the model changes.
11. What We Offer, Stated Plainly
For LED mesh facade systems, our standard terms:
| Item | Term |
|---|---|
| Workmanship and material | 5 years, replacement (not pro-rata) |
| Water ingress | 5 years, on pre-assembled IP67 connectors, potted modules |
| Luminous maintenance | L70 at 50,000 h, verified against the commissioning baseline |
| Dead pixels | ≤0.03% at acceptance, ≤0.1% at year 5 |
| Response | Technical response within 48 h; replacement modules dispatched within 10 working days |
| Freight of replacement parts | Covered by us for the first 3 years |
| Spare modules held | 3–5% produced with the order, retained at our factory for the project |
| Model support | 8 years from delivery, with mounting-interface compatibility guaranteed |
| If a model is discontinued | Nearest equivalent offered, with the mounting interface and connector type unchanged, or a stocked lifetime buy for your project |
Marine-grade anodising and 500-hour salt spray documentation are standard for projects within 5 km of the coast, not an upgrade. We would rather quote the coastal specification once than argue about a corroded frame in year two.
FAQ
When does an LED facade warranty start? It should start at acceptance or substantial completion, when the facade is installed, calibrated and signed off. Many certificates instead start at delivery, at invoice, or at “30 days after delivery or 90 days after shipment, whichever is earlier”. On a four-month installation programme that can consume 7% of a five-year term before the building is even occupied. Get the start date written in words, and add a suspension clause for site delays.
Is a longer warranty always better? No. Length without criteria, response times and freight terms is a number, not a commitment. A three-year replacement warranty with 48-hour response and covered freight is worth more than an eight-year pro-rata warranty that excludes access equipment. Compare the six variables, then the years.
Does the warranty cover labour and access equipment to replace modules? Usually not, and this is the largest hidden cost on high-rise facades. Labour and rope access or gondola hire for a repair campaign commonly exceed the value of the modules. Negotiate a defined contribution — even a fixed number of covered interventions — rather than assuming it is included.
What voids a facade warranty most often? Site-terminated connectors, pressure washing, unapproved cleaning chemicals, and installation by a contractor who did not follow the published method. All four are avoidable, and all four are worth writing into the installation contract rather than discovering at claim time.
How do I verify a warranty will still be honoured in year five? Ask for the model support period in writing, ask where spare modules for your project are held, and ask to see the warranty claim procedure. A supplier that retains project spares at its factory has made a physical commitment that a certificate alone does not represent.
Can the warranty be extended? Often yes, priced either as a percentage of order value or as an annual maintenance-plus-warranty contract. Extension is usually cheaper negotiated at order stage than purchased later, because the supplier is still pricing an unknown rather than a known failure history.
Product ranges
- LED mesh screen — specifications, models and technical matrix
- Architectural LED facade lighting — mesh, linear and pixel systems
Related engineering guides
- IP67 vs IP68 waterproof LED facade lighting: what the ratings mean
- Bridge and coastal facade lighting: engineering for salt, wind and vibration
- LED mesh screen installation guide
- Glass curtain wall lighting and fire inspection
- Media facade lighting manufacturer guide: how to vet suppliers
Get the warranty terms before the price
Send us the site’s distance to the coastline and the facade height, and we will return the warranty schedule that applies — criteria, response times, freight responsibility and spares holding — as a document your legal team can mark up. No price discussion required first.
Step 1 — see the LED mesh screen range or the full facade lighting range. Step 2 — request the warranty schedule.
Project enquiry
Send your drawings. Get a specification you can defend.
Elevation DWG, facade area, closest viewing distance and site country — we reply within 48 hours with a fixture matrix, power and DMX topology, and a quotation. No price-only quotes.
5,000+ projects delivered · 40+ countries · ISO 9001 · CE / UL / RoHS
About MEKALEO
We are an LED media facade manufacturer based in Guzhen, China, running our own 8,000 m² factory. Founded in 2004. 5,000+ projects delivered across 40+ countries. ISO 9001 certified; products carry CE, UL and RoHS certification. Address: No. 398, Haizhou East Bank North Road, Guzhen Town, Zhongshan City — factory visits and live video audits welcome.